Drager Fabius GS Anesthesia Machine

Availability: In stock


Be the first to review this product

Categories : Anesthesia

Product Description

The Fabius GS combines advanced ventilation technology with reliable and proven breathing system components, opening new frontiers in ventilation performance while maintaining well-established functionality.

The electrically driven and electronically controlled Fabius GS E-vent ventilator requires no drive gas. This makes it more flexible and economical to use than traditional gas-driven bellows ventilators by limiting the consumption of expensive medical grade gas to patient use only. Motor-driven hardware and software-controlled functionality also offer virtually unlimited upgradeability. The Fabius GS is suitable for any patient — pediatric to adult — and provides Volume Controlled Ventilation, Pressure Controlled Ventilation, Synchronized Volume Control (SIMV), Pressure Support and Manual/Spontaneous modes. Pressure Support mode facilitates spontaneous breathing by removing the work of breathing due to circuit resistance, improving comfort levels and enhancing quality of patient care.

The Fabius GS is the world’s first anesthesia machine with vertical flow controls and electronic fresh gas flow indicators, enabling you to compare gas flows more easily and intuitively. Additionally, the export of fresh gas data to an information system allows monitoring of gas usage and to promote the use of low-flow anesthesia.

The flexible, ergonomic design of the Fabius GS allows for optimal positioning of the semi-closed breathing system (COSY). The COSY can be height- adjusted, pre-assembled on the left or right side of the machine and can be easily removed from the machine for cleaning and sterilization. The COSY not only minimizes set-up and installation time but also substantially reduces the potential for leaks, OR pollution and overall gas consumption. It is simply a smarter and much more ergonomic design.

The Infinity monitoring line offers an outstanding cable management approach: The MultiMed® parameter module reduces cable clutter and simplifies patient transfer. Moreover the unique Pick and Go® capabilities of the Infinity patient monitoring system provide continuous monitoring during transport and automatic reconfiguration of site specific parameters with Dräger Medical’s innovative Infinity Docking Stations (IDS).

The Pick and Go concept also provides significant efficiency and quality benefits. Because the monitor moves with the patient, no separate transport monitor is required and you will need fewer monitors throughout the patient care process. The choice of a fixed-mount monitoring solution or the Pick and Go transport concept gives you maximum flexibility to adapt your complete anesthesia solution to today’s evolving requirements.


Product Specifications

Weight (base unit without vaporizers or cylinders): 224 lbs (101.6 kg)

Dimensions: (W) 89.5 cm x (H) 130 cm x (D) 82 cm 35.2 x 51.2 x 32.3 inches)

Power Supply: 100-240 VAC, 50/60 Hz, 2.3 A max.

Battery (supports ventilator and monitor): > 45 min

Positive End-Expiratory Pressure (PEEP): 0-20 cmH2O

Inspiration/Expiration Ratio (Ti:Te): 4:1 to 1:4

Pressure Limiting (Pmax): 15-70 cmH2O

Tidal Volume (Vt): 20-1400 mL in Volume Control; 20-1100 mL in SIMV/PS

Inspiratory pause (Tip:Ti): 0-50%

SIMV Inspiratory Time (Tinsp): 0.3-4.0 sec

Inspiratory Pressure (Pinsp): PEEP + 5 to 65 cmH2O

Inspiratory Flow (InspFlow): 10-75 L/min in Volume and Pressure Control, 10-85 L/min in Pressure Support

Pressure Support Level (ΔPPS): PEEP + 3 to 20 cmH2O

Min. Frequency for Apnea-Ventilation (Freq. Min.): 3-20 bpm and “OFF”

Trigger: 2-15 L/min

Range of Fresh Gas Flow Indicators: 0.00 to 12.0 L/min

Total Fresh Gas Flow Meter: 0 to 10 L/min, calibrated with a mixture of 50 % O2 and 50 % N2O mixture

O2 Flush: at 87 psi (6 bar): max.75 L/min, at 41 psi (2.8 bar): min 25 L/min

Vaporizer Mount: Drager or SelectatecR mount

Serial Interface: 1 x RS 232 (standard), 1 x RS 232 (option)

Protocols: Vitalink and Medibus

Volume of CO2 Absorber: 1.5 Liter, option: Drager medical’s consumable CLIC adsorber

Volume of Entire compact Breathing System: 2.8 Liter + bag


There are no reviews yet.

Be the first to review “Drager Fabius GS Anesthesia Machine”

custom contents goes here